DownloadDiagnose and clear fault codes while monitoring DPF status in BMW vehicles
Bimmer-Tool enables reading & clearing fault codes, initiating DPF regeneration, accessing live engine data, and performing comprehensive diagnostics for BMW models.
For pre-2008 model year vehicles, functionality may be limited - we recommend using a K+DCan USB cable connection. Wireless ELM adapter connections with older models may encounter compatibility issues or feature restrictions.
Note: Reliable OBD adapter required. Recommended connections include K+DCan cable, ENET adapter (for F/G series), or these Bluetooth adapters:
- Vgate vLinker MC/FS/BM/FD https://www.vgatemall.com/products/
- UniCarScan UCSI-2000/USCI-2100: Configure to D-Can mode: MODE2 https://www.wgsoft.de/shop/obd-2-komplettsysteme/unicarscan/114/unicarscan-ucsi-2000-diagnoseadapter
https://www.bmdiag.co.uk/unicarscan-ucsi-2000-bluetooth-obd2-adapter
- Carista https://caristaapp.com/adapter
- Veepeak OBDCheck BLE https://www.veepeak.com/product/obdcheck-ble
Key features include:
- Monitoring DPF regeneration status with detailed reporting
- Initiating DPF regeneration cycles
- Resetting DPF adaptation values post-filter replacement
- Reading exhaust backpressure data
- Analyzing injector calibration values
- Comparing actual vs expected metrics for air mass, manifold pressure, and fuel pressure
- Exporting diagnostic logs to CSV format
- Registering battery replacements (without parameter changes)
- Resetting short-circuit blocked lamp circuits
- Resetting service intervals for oil/brakes**
Compatible OBD adapters:
- K+D-Can USB: Most reliable option (requires USB-OTG cable)
- ENET cable/WiFi Adapter: Preferred for F & G series (needs USB-C to Ethernet adapter)
- ELM327 Bluetooth: Slower than USB (only authentic ELM327/PIC18 adapters work; limited compatibility with older engines)
- ELM327 WiFi: Requires disabling mobile data; connection stability may vary
For support inquiries, please email using the address listed at page bottom.
Getting started:
1) Plug adapter into OBD II port
2) Switch ignition to ON position
3) Establish device connection:
* USB: Connect via OTG cable - select Bimmer-Tool when prompted
* Bluetooth: Pair adapter (default PIN: 0000/1234) in device settings
* WiFi: Disable mobile data, connect to adapter's network
4) Launch app > Navigate to 'Car' > Select model/year
5) Access 'Connection' > Configure adapter type and protocol
6) Press 'Connect'
**Compatibility notes:
Pre-2008 models (including e46/e39/e83/e53) require K+DCan cable and support only engine ECU diagnostics. Wireless ELM adapter connections may fail.
Troubleshooting:
- Intermittent 'No response' errors (pre-2007 models with BT/WiFi): Try enabling ATWM in advanced settings
- Persistent connection failures: Close all diagnostic apps (via app manager) or reboot device before retrying
Permission requirements:
- Storage: USB adapter compatibility
- Media access: CSV file generation
- Bluetooth pairing: Wireless adapter support
- Network access: WiFi functionality
- Location services: Bluetooth protocol requires (not utilized)
What's New in the Latest Version 3.7.6-L
Last updated on Nov 10, 2024
Added diesel idle speed calibration
Enhanced throttle body control
